Ozone Exterior Acrylic Emulsion
O-zone Exterior Acrylic Emulsion is based on styrene acrylic copolymer emulsion.
| Finish | - Slight Sheen |
| Uses | - Can be used on both exterior and interior walls |
| Cost Range | - Economy |
| Gloss | Slight Sheen |
| Consistency | Smooth and free flowing |
| Thinner Recommended | Potable Water |
| Substrate | Plaster Surface |
| Method | Brush, Roller, Spray |
| System | Brush, Roller and Spray: Apply one coat of Ten Premium / Dr. eX Exterior Cement Primer Water Thinnable before applying O-zone Exterior Acrylic Emulsion. |
| Application Viscosity | Use one litre of O-zone Exterior Acrylic Emulsion with 700 to 800 ml, of potable water. |
| Drying - | Surface Drying: 30 minutes Hard Drying: 3 to 4 hours Recotability: 4 hours |
| Supply Viscosity | 90 ± 10 Krebs |
| Coverage | 12 - 14 sq.mtrs/lit./coat as per IS 101 |
| Grinding | 5+ on Hegmann guage |
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
Note: For best results use with Ten Premium Acrylic Exterior Cement Primer or Dr. eX Acrylic Exterior Cement Primer
