Aloha Acrylic Emulsion
Aloha Acrylic Emulsion is based on styrenated acrylic copolymer emulsion with smooth finish, excellent opacity and anti-fungal properties.
| Finish | - Slight Sheen |
| Uses | - Can be used on both exterior and interior walls |
| Cost Range | - Midrange |
| Gloss | Slight Sheen |
| Consistency | Thick Buttery |
| Thinner Recommended | Potable Water |
| Substrate | Plaster Surface |
| Method | Brush, Roller, Spray |
| System | Brush, Roller and Spray: Apply one coat of Ten Premium Cement Primer Water Thinnable before applying Aloha Acrylic Emulsion. |
| Application Viscosity | Use one litre of Aloha Acrylic Emulsion with 300 to 400 ml, of potable water. |
| Drying - | Surface Drying: 30 minutes Hard Drying: 3 to 4 hours Recotability: 4 hours |
| Supply Viscosity | 90 ± 10 Krebs |
| Coverage | 12 - 16 sq.mtrs/lit./coat as per IS 101 |
| Grinding | 5+ on Hegmann guage |
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
Note: For best results use with Ten Premium Cement Primer Water Thinable or Mahotsav Cement Primer Water Thinable
