Ten Premium Medium Lusture Enamel
Ten Premium Medium Lusture Enamel is a classy wall finish product which gives excellent finish, high flow levelling and durability. It can be cleaned with mild soap solution to remove stains. It develops variety of texture when roller is applied.
Finish | - Egg Shell Sheen |
Uses | - Can be used on both exterior and interior walls |
Cost Range | - Premium |
Gloss | Egg Shell Sheen |
Consistency | Suitable for brushing |
Thinner Recommended | General Purpose Thinner |
Substrate | Metal, Plaster Surface, Wood |
Method | Brush, Roller, Spray |
System | For Metal: After pretreatment or phosphating apply Ten Red Oxide Metal primer 25 to 30 μ. Apply 2 to 3 coats of Ten Premium Medium Lusture Enamel - 25 to 30 μ. For Wood/Plaster: After Ten Cement Primer Water Thinable or Ten Cement Primer Solvent Thinable 20 to 25 μ. Apply 2 to 3 coats of Ten Premium Medium Lusture Enamel - 25 to 30 μ. |
Application Viscosity | For Brushing: Supplied at suitable for brushing viscosity. If required upto 2% of Mineral Turpentine may be added. For Spraying: Thin down with Mineral Turpentine to 50 - 60 sec. by F/C No. 4 @ 30°C. |
Drying - | Surface Drying: 2 to 3 hours Hard Drying: 4 to 6 hours Recotability: Over night |
Supply Viscosity | 120 ± 10 sec. by F/C No. 4 @ 30°C |
Coverage | 20 -24 sq.mtrs/lit./coat as per IS 101 |
Grinding | 5+ on Hegmann guage |
Flash Point: | >32°C |
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
Note: For best results use with Ten Premium Cement Primer Solvent Thinable or Mahotsav Cement Primer Solvent Thinable