Ten Premium Synthetic Enamel
Ten Premium Synthetic Enamel is based on high quality synthetic resins so as to achieve high gloss and smooth finish with water, acid and alkali resistance as per IS - 101 and also having good UV resistance.
| Finish | - Glossy |
| Uses | - Can be used on both exterior and interior walls |
| Cost Range | - Premium |
| Gloss | Glossy |
| Consistency | Suitable for brushing |
| Thinner Recommended | General Purpose Thinner |
| Substrate | Metal, Plaster Surface, Wood |
| Method | Brush, Roller, Spray |
| System | For Metal: After pretreatment or phosphating apply Ten Red Oxide Metal primer 25 to 30 μ. Apply 2 to 3 coats of Ten Premium Synthetic Enamel - 25 to 30 μ. For Wood/Plaster: After Ten Cement Primer Water Thinable or Ten Cement Primer Solvent Thinable 20 to 25 μ. |
| Application Viscosity | For Brushing: Supplied at suitable for brushing viscosity. If required upto 2% of Mineral Turpentine may be added. For Spraying: Thin down with Mineral Turpentine to 50 - 60 sec. by F/C No. 4 @ 30°C. |
| Drying - | Surface Drying: 3 hours Hard Drying: 4 to 6 hours Recotability: Over night |
| Supply Viscosity | 120 ± 10 sec. by F/C No. 4 @ 30°C |
| Coverage | 16 -20 sq.mtrs/lit./coat as per IS 101 |
| Grinding | 5+ on Hegmann guage |
| Flash Point: | >32°C |
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
- 200 ml
- 500 ml
Note: For best results use with Ten Premium Wood Primer or Mahotsav Wood Primer
