Red Oxide Metal Primer Glossy
Red Oxide Metal Primer Glossy is based on CNSL varnish. It is recommended to use on surfaces where gloss is required and is not to be painted further.
Finish | - Glossy |
Uses | - Can be used on both exterior and interior walls |
Cost Range | - Economy |
Gloss | Glossy |
Consistency | Suitable for brushing |
Thinner Recommended | General Purpose Thinner |
Substrate | Metal |
Method | Brush, Roller, Spray |
System | After pretreatment or phosphating apply Red Oxide Metal Primer Glossy 25 to 30 μ. |
Application Viscosity | For Brushing: Thin down with Mineral Turpentine 100 ± 10 sec. by F/C No. 4 @ 30°C. For Spraying: Thin down with Mineral Turpentine to 30 - 40 sec. by F/C No. 4 @ 30°C. |
Drying - | Surface Drying: 2 to 3 hours Hard Drying: 6 to 8 hours Recotability: Over night |
Supply Viscosity | 150 ± 10 sec. by F/C No. 4 @ 30°C |
Coverage | 12 - 14 sq.mtrs/lit./coat as per IS 101 |
Grinding | 5+ on Hegmann guage |
Flash Point: | >32°C |
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
- 200 ml
- 500 ml