Mahotsav Black Board Paint
Mahotsav Black Board Paint gives excellent finish, high flow leveling and durability. It has excellent matt finish. It can be cleaned with mild soap solutions to remove stains.
| Finish | - Smooth |
| Uses | - Can be used on both exterior and interior walls |
| Cost Range | - Economy |
| Gloss | Smooth |
| Consistency | Suitable for brushing |
| Thinner Recommended | General Purpose Thinner |
| Substrate | Metal, Plaster Surface, Wood |
| Method | Brush, Roller, Spray |
| System | For Metal: After pretreatment or phosphating apply Ten Red Oxide Metal primer 25 to 30 μ.Apply 2 to 3 coats of Mahotsav Black Board Paint - 25 to 30 μ. For Wood: After Ten Premium Wood Primer 20 to 25 μ apply 2 to 3 coats of Mahotsav Black Board Paint - 25 to 30 μ. For Plaster:After Ten Cement Primer Solvent Thinable 20 to 25 μ apply 2 to 3 coats of Mahotsav Black Board Paint - 25 to 30 μ. |
| Application Viscosity | Supplied at suitable for brushing viscosity. If required; up to 2% of Mineral Turpentine may be added. For spraying, thin down with Mineral Turpentine to 25-30 sec. by F/C N0.4 @ 30 C |
| Drying | Surface Drying: 2 to 3 hours Hard Drying:4 to 6 hours Recotablity:Overnight |
| Supply Viscosity | 120 ± 10 sec. by F/C No. 4 @ 30°C. |
| Coverage | 18 - 23 sq.mtrs/liter/coat as per IS 101 |
| Grinding | 5+ on Hegmann guage |
| Flash Point: | >32°C |
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
- 50 ml
- 100 ml
- 200 ml
- 500 ml
Note: For best results use with Ten Premium Cement Primer Water Thinable or Ten Premium Wood Primer or Ten Premium Red Oxide Metal Primer
