Zinc Phosphate Primer Surfacer Black
Zinc Phosphate Primer Surfacer Red is based on high quality synthetic resin. It gives good adhesion and corrosion resistant coating and features better filling qualities and so should be used when trying to build film thickness.
|Uses||- Can be used on both exterior and interior walls|
|Cost Range||- Premium|
|Consistency||Suitable for brushing|
|Thinner Recommended||General Purpose Thinner|
|Method||Brush, Roller, Spray|
|System||After pretreatment or phosphating apply Zinc Phosphate Primer Surfacer Red.
For best results Dry Film Thickness (DFT) should be 24 to 30 μ.
|Application Viscosity||For Brushing: Supplied at suitable for brushing viscosity. If required upto 2% of Mineral Turpentine may be added.
For Spraying: Thin down with Mineral Turpentine to 30 - 40 sec. by F/C No. 4 @ 30°C.
|Drying||Surface Drying: 1 hour
Hard Drying:6 to 8 hours
|Supply Viscosity||90 ± 10 sec. by F/C No. 4 @ 30°C|
|Coverage||14 - 16 sq.mtrs/lit./coat as per IS 101|
|Grinding||5+ on Hegmann guage|
Available in packs of:
- 20 ltr