Mahotsav Red Oxide Zinc Chrome Primer ISI Grade
Mahotsav Red Oxide Zinc Chrome Primer ISI Grade is based on high quality synthetic resin with zinc chrome content 24% on solids. It gives good adhesion and corrosion resistant coating.
| Finish | - Smooth |
| Uses | - Can be used on both exterior and interior walls |
| Cost Range | - Premium |
| Gloss | Smooth |
| Consistency | Suitable for brushing |
| Thinner Recommended | General Purpose Thinner |
| Substrate | Metal |
| Method | Brush, Roller, Spray |
| System | After pretreatment or phosphating apply Mahotsav Red Oxide Zinc Chrome Primer ISI Grade. For best results Dry Film Thickness (DFT) should be 24 to 30 μ. |
| Application Viscosity | For Brushing:Supplied at suitable for brushing viscosity. If required upto 2% of Mineral Turpentine may be added. For Spraying:Thin down with Mineral Turpentine to 30 - 40 sec. by F/C No. 4 @ 30°C. |
| Drying | Surface Drying: 1 hour Hard Drying:6 to 8 hours Recotability: Overnight |
| Supply Viscosity | 90 ± 10 sec. by F/C No. 4 @ 30°C |
| Coverage | 14 - 16 sq.mtrs/lit./coat as per IS 101 |
| Grinding | 5+ on Hegmann guage |
| Flash Point: | >32°C |
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
- 200 ml
- 500 ml
