Mohatsav Red Oxide Metal Primer
Mohatsav Red Oxide Metal Primer is based on special CNSL varnish. It gives good adhesion and corrosion resistant coating.
|Uses||- Can be used on both exterior and interior walls|
|Cost Range||- Economy|
|Consistency||Suitable for brushing|
|Thinner Recommended||General Purpose Thinner|
|Method||Brush, Roller, Spray|
|System||After pretreatment or phosphating apply Mahotsav Red Oxide Metal primer 25 to 30 μ.|
|Application Viscosity||For Brushing: Supplied at suitable for brushing viscosity. If required upto 2% of Mineral Turpentine may be added.
For Spraying: Thin down with Mineral Turpentine to 30 - 40 sec. by F/C No. 4 @ 30°C.
|Drying||Surface Drying: 1 hour
Hard Drying: 8 to 10 hours
Recotability: Over night
|Supply Viscosity||120 ± 10 sec. by F/C No. 4 @ 30°C|
|Coverage||11 - 13 sq.mtrs/lit./coat as per IS 101|
|Grinding||5+ on Hegmann guage|
Available in packs of:
- 1 ltr
- 4 ltr
- 10 ltr
- 20 ltr
- 200 ml
- 500 ml